Solar & Roofing Blog | Uprise Solar

If the Power Went Out Tonight, What Would You Want to Keep Running?

Written by Patrick Cavanaugh | Nov 17, 2026, 3:20:00 AM

Home battery backup in Washington, DC, Maryland, and Northern Virginia, explained without the technical jargon.

On one of my favorite home battery projects, I asked the homeowners what they wanted to keep running if the power went out. Right near the top of their list? Their expensive ice maker and margarita machine.

“Are you sure?” I asked.

“What else are you going to do during a power outage?” they said. “Make margaritas and listen to music.”

Fair point.

That’s the question I like to start with when someone asks me about home battery backup. If the power went out tonight, what would you want to keep running? Your answer helps us figure out how much battery capacity you need and what we can set to turn off automatically so your essentials keep running longer.

What can a home backup battery power?

Here’s what homeowners often ask us to back up:

  • The refrigerator and freezer.
  • Lights in the rooms you use most.
  • Phone chargers, a laptop, and the TV.
  • Your modem and router, as long as your internet provider’s network stays up.
  • A sump pump or certain heating equipment, depending on how we design the system.

If central AC is on your list, tell us how long you’d want it to run. A few hours of cooling can change the size and cost of your battery system quickly, so it’s worth talking through early.

Battery backup can switch on before you notice the outage

Think about unplugging your phone or laptop from the wall. It keeps running on its battery without you having to do anything.

A properly configured home battery provides a similar automatic handoff for the circuits it backs up. The transition can be so fast that you may not even realize the utility power is out. You don’t have to be home or awake to turn it on.

A brief interruption is still possible, depending on the equipment and outage conditions. The point is that backup happens automatically. That convenience is also why it’s important to control what keeps running.

Already have solar? Solar panels alone usually don’t provide backup.

Most standard grid-connected solar systems shut down when utility power goes out. They need the right equipment to safely isolate your home from the utility grid and operate during an outage.

Solar and battery system can power the backed-up circuits and use available sunlight to recharge the battery. Adding a battery to existing solar may be possible without replacing the panels, but we need to check the inverter, electrical panel, and system design first. 

We can review systems installed by another company, too. If you’re considering a new solar installation, bring up backup power early so we can plan both together.

What do watts actually mean for your home?

Most people don’t think in watts. They think, “Can I keep the refrigerator running and make coffee in the morning?” That’s how we should talk about backup power.

Watts tell us how much power something uses while it’s running. A kilowatt is simply 1,000 watts. Kilowatt-hours, or kWh, measure the amount of energy used over time. That’s also how we describe how much energy a battery stores.

Here’s a practical comparison: a space heater running at 1,500 watts uses as much power as 150 LED bulbs using 10 watts each. Run that heater continuously for one hour and it uses 1.5 kWh, before accounting for battery-system losses.

So a small appliance isn’t necessarily a small drain on your battery. And something you run for five minutes is a different consideration from something running all night.

What you’re using What it means for backup
Refrigerator, LED lights, phones, and internet equipment A common starting point for essentials. Refrigerator use changes as it cycles on and off.
Coffee maker, microwave, or electric kettle Can draw substantial power while operating, but you may only need them briefly.
Central AC, electric heat, electric water heating, or EV charging Can use stored energy quickly when running. These deserve particular attention in the backup plan.

Actual use varies by appliance and setting. Virginia Cooperative Extension explains how appliance wattage and running time work together. We handle that math when designing your system.

How long will a home battery last during an outage?

The same battery can last much longer supporting a refrigerator, a few lights, and phone charging than it will with central AC or electric heat running alongside them.

A useful runtime estimate needs to consider how charged the battery is, which appliances are running, how often they cycle, and whether solar can recharge it. The equipment also needs enough power to start and run those appliances.

Solar can extend backup time, but cloudy weather, shade, snow, and shorter winter days affect production. Ask what the system can do with limited sunlight as well as on a sunny day. Your proposal should explain the assumptions behind its runtime estimate.

Why load shedding is one of the most important parts of battery backup

A “load” is just something using electricity. Load shedding means automatically turning off selected appliances so they don’t use up energy you want to save for other things.

Imagine the power goes out at 2 a.m. Your battery takes over, you stay asleep, and the AC keeps running. Or the outage happens while you’re out, with an EV charging in the driveway.

Those larger appliances can use up your stored energy without anyone realizing the house is on battery power. By the time you notice, you may have far less backup left for the refrigerator, lights, or other priorities.

For whole-home backup, I consider load shedding one of the most important parts of the design. We should decide in advance what stays on, what can wait, and what turns off as the battery runs down.

That way, you’re not relying on someone to notice the outage and start switching appliances off.

FranklinWH can shed a few selected large loads

One reason I like FranklinWH is its ability to manage a few selected loads using the optional Smart Circuits module.

With the right wiring and settings, we can control compatible larger appliances, such as an AC unit or EV charger, and have selected circuits turn off at configured battery-charge levels. That helps preserve energy for the things you want to keep running.

This is control over a small number of selected circuits. The exact number and type of appliances depend on their electrical requirements and how the system is wired. We confirm those details during design.

I have a FranklinWH battery at my own home in DC, and load shedding was one of the reasons I chose it. I don’t want a large appliance quietly using up the battery while nobody realizes the power is out.

 

Does Tesla Powerwall 3 offer load shedding?

Yes. Tesla Powerwall 3 offers built-in load-shedding capability. An installer can wire its built-in low-voltage control relay to compatible equipment, such as a central AC unit, and configure that equipment to turn off when the system switches to backup power. Tesla explains this load-shedding feature in its installation manual.

The important part is that your installer must wire and configure it. Simply installing a Powerwall does not automatically tell it which large appliances to shut off.

Tesla’s current U.S. setup guide allows one low-voltage control circuit with Backup Switch or Gateway 3, or up to two with Backup Gateway 2. These connections control compatible equipment. They do not provide individual control over every breaker in your panel.

Powerwall 3 also supports whole-home or partial-home backup. The design determines what gets power. In a whole-home setup, large appliances can keep drawing from the battery unless they are turned off or managed, and the battery still has limits on how much it can power at once.

 

What is a SPAN Panel, and how does it work with a home battery?

You know the breaker box where you reset a tripped circuit? A SPAN Panel replaces a conventional electrical panel and adds monitoring and control through an app. You can see how much electricity individual circuits use and turn them on or off from your phone.

SPAN is a separate product from both FranklinWH and Tesla Powerwall. The battery stores energy. SPAN manages the circuits that use it. SPAN does not store electricity or provide backup power on its own.

You can pair SPAN with compatible FranklinWH and Tesla Powerwall 3 systems. We check the exact panel, battery, and supporting equipment before recommending a combination.

When we connect SPAN to a compatible battery system and configure its backup controls, you can:

  • See which circuits use electricity.
  • Choose which circuits stay on during an outage.
  • Set selected nonessential circuits to turn off automatically when backup begins.
  • Have additional circuits turn off as the battery charge falls.

For example, you could prioritize the refrigerator, lights, and internet while having the AC and EV charger shut off automatically. You set those backup priorities in advance, and SPAN follows them even if you sleep through the outage.

At Uprise, we recommend considering SPAN when you want more visibility and control over your home’s electricity use, whether you choose FranklinWH or Tesla. We choose the battery around your backup needs, existing equipment, and budget. Then we decide whether SPAN’s additional controls make sense for your home.

FranklinWH’s Smart Circuits and Powerwall 3’s built-in load-shedding controls may already cover the selected appliances you want to manage. SPAN gives you broader control across the circuits in the panel.

For me, SPAN is the gold standard for that level of circuit control. It isn’t cheap, but this is one of those products where I think you get what you pay for. You’re paying for a smart electrical panel and the ability to manage your priorities in much more detail.

I could write a whole blog post about SPAN, and I probably will. For now, think of it this way: choose the battery for the energy you need, and consider SPAN for more control over where that energy goes.

 

What should a battery backup quote include?

Compare what the complete system will do for your home, including the battery capacity, electrical work, backup controls, and any panel upgrades.

Before you sign, you should understand:

  • Which appliances and circuits will work during an outage.
  • How long they’re expected to run and what that estimate assumes.
  • Which larger appliances will turn off automatically, and when.
  • What equipment, installation work, and warranties are included.

If you want essentials overnight, say that. If you want air conditioning during an extended outage, say that, too. Those are different jobs, and the system needs to be designed accordingly.

A couple of other battery backup questions

Do I need solar panels to install a battery?

Some home batteries can charge from the utility grid without solar. During an outage, that stored supply is finite. Compatible solar gives you a way to generate electricity and recharge during the outage when conditions allow.

Will the battery work if the internet goes down?

It depends on the equipment. FranklinWH says its core backup functions work without internet, although remote app access is affected. Separately, keeping your router powered won’t restore internet service if your provider’s network is down.

Let’s figure out what your home should keep running

A DC rowhouse, a Maryland home with a basement sump pump, and a Northern Virginia house with electric heating can have very different backup needs.

At Uprise Solar & Roofing, we help homeowners across Washington, DC, Maryland, and Northern Virginia plan home battery storage around what matters to them.

Send us a recent electric bill, any information you have about existing solar, and your list of essentials. We’ll help you work through the battery size, expected runtime, load-shedding options, and installation cost.

And if the margarita machine makes the list, just tell us. We’ve heard that one before.

Find out what battery backup could power in your home.